- Selecting a Builder – You can get quotes from a few different builders. It is your right to shop around. Ask to see some references and previous work. Don’t always look at price. Check for insurance as mentioned above and ask for proof on this. Remember your home is your castle after all and you want the best tradesmen to work on it.
- Contract – Once you have selected the appropriate builder, get a contract drawn up right from the start. Therefore you all know where you stand. Some builders will have their own contracts so be sure to read this through thoroughly. You need the details of both you and the builders, where the work will be carried out and the cost of the repair or building work. Beware of builders who will not enter into a contract.
- Unforeseen Charges – Be mindful that there maybe other work which is not stated in the contract. Sometimes there are complications and extra work needs to be carried out. In this situation, get a price and add this either to the contract or have it put in writing for your records.
- Start and Finish – Any building work will cause some form of up evil, so try to have a deadline for the work to be carried out and agree to this with your builder and have the start and finish dates in your contract. This is helpful so you can claim for any damages if the work goes on for longer than the finish date.
- Termination of Contract – This may occur so if either you or the builder wishes to terminate the contract, make sure you have an agreement before the work is started if the situation arises.
- Sorting Out Disputes – Even though you have a contract this doesn’t actually mean there will be no problems along the way. Things can go wrong and if they do communicate with the builder and make sure you always have written evidence for your records. Most problems can be resolved like this, don’t let it get to a state where the work is stopped and the builder leaves the site.
Location, Size & Area Codes
Before you go ahead with making detailed plans, you are going to have to decide the exact location where you intend to build your deck and the size of the intended deck. Do you want to build just a small porch where you can sit around reading a book on a bright sunny day or do you have plans on building an extended porch that goes right round from one side of your home to the other? Even if your area building code allows you to construct a full deck, you need to determine if there are other physical or space limitations. Think about things like the placement of steps, the breadth of the corners.
Choosing The Right Material
Wood, especially weather resistant varieties such as cedar, redwood and cyprus used to be the most popular material for building custom decks but things are changing now and more homeowners are preferring to use resin materials or wood that is pre-treated with preservatives. This is because these newer materials are sturdier than their older counterparts and will last longer even with minimal maintenance and care. This can save you a whole lot of time and money in the long run.
Don’t Get Caught In The DIY Trap
There are lots of projects you can do by yourself if you are a DIY enthusiast, however, building a custom deck is not one of those. If you are looking into getting one made, you would have already realized that it is not a simple project that any amateur can undertake by themselves as a do it yourself project. Even the simplest looking porch can be complex to construct as there are several different and complex engineering and carpentry factors involved.
Owing to their high demand, sofa sets are available in an array of designs & sizes in the markets. The size of these depends on their seating. The most prevalent sizes are three, five or seven-seater. The patterns comprises of classical & causal designs. These are offered in attractive wooden frames with comfortable cushions & fascinating color fabric in order to make the elegant & stylish.
If you are perplexed that which design perfectly match your house, then there are some tips that can easily solve your problem. The classic sofa sets will be the perfect choice for your house if you just love traditional designs. These designs give the feeling of royalty & give perfect decoration to the place. The size specification depends on the available space. If your living room is spacious then size doesn’t bother you much. You can go for the grand size that can accommodate five to seven people. The main advantage associated with the grand size is that it gives the royal taste. This will surely multiply the charm of your living room. If space is a cause of concern, then you can opt for smaller or compact size. To meet this situation, manufacturers are offering their furniture products in custom sizes. In this, these are specially designed as per the available space.
The manufacturers are offering designer sofa sets to meet the end requirements of the clients. These are specially crafted collections that are offered in designer frames. These designs are crafted as per the latest prevailing fashion trends for those who want exclusive range. Apart from this, manufacturers are also offering their products in custom designs.
The color of the sofa sets also plays a crucial role in making the living room decorated. It is recommended that you should opt the color that perfectly suits the theme of the room. The design & color should be in perfect harmony to other decorative items. It should not be in offbeat color as it will spoil the interiors of the room.
Closet organizers are seen to be a neat solution for a closet to have items put inside in some proper order for neatness and orderliness. Closet organizers can be custom built or readymade. Custom built closet organizers would require specific designs and measurements to fit the available space perfectly while readymade organizers for closets would fit standard spaces.
Some consumers do not mind readymade closet organizers as long as the component fits the available space without costing too much or taking too much installation hassle. Readymade closets with proper organizer features allow the consumers to get things packed in quickly for a neat and fast solution to a stack of items which require storage.
Homeowners do not need to wait for spring or fall to perform their annual or ritual spring cleaning with a closet organizer. There are no more nightmares for the consumers who have a tendency to hoard. The closet with an organizing feature keeps all items in their place which allows consumers to leave them as they are even when a quick dusting or wiping may be required.
Styles and designs
Consumers can choose any style or design for an effective closet organizer which can be custom built or readymade. Such closets can be found in the bedroom, pantry, bathroom, hallway, patio, garage and attic depending on the likes of the consumer.
Closet organizers can come with rods and hooks to hang up garments while drawers are available for smaller and personal items. There can be special hangers for ties and belts while shoe trees are well used to organize shoes.
Larger spaces can accommodate a larger and well structured closet with more organizational features. There may be more storage shelves in various sizes and shapes to cater to the different items. A kitchen closet can store canned and boxed foods with appropriate hooks to hang up pots and pans.
There are countless DIY methods that you can use to revamp your current living room furniture that will allow you to get the design aesthetic you want without shelling out tons of cash. These suggestions will work great on outdated furniture that you’ve had for years, as well as thrift store finds that can help you save on the general costs of moving. Keep reading for some easy suggestions on how to work with what you’ve got.
- Use old pieces in new ways. For example, thrift stores are full of really old TV stands on wheels. You can easily purchase one of these for a low price, paint it, and turn it into a gorgeous bar cart. This is not only great for entertaining, but it will serve as an unexpected piece of living room furniture that will add an air of sophistication to your space.
- Create a coffee table-ottoman hybrid. An upholstered coffee table is not only easy to make, it can also serve as a colorful ottoman. More importantly, upholstering an ugly coffee table can make your cheap thrift store find look beautifully brand new. All you need is a fresh coat of paint and some colorful cushions.
- Revive your side chairs! This is quite simple. Ugly side chairs can be purchased for low prices and completely transformed with just some paint and a bit of reupholstering. Check online for tips on how to reupholster, but know that it’s really just a bit of measuring and a commitment to stapling.
- – Use wallpaper! Wallpaper is definitely in the middle of a major resurgence, and it can be used in unexpected places to add a fun pattern or pop of color to your space. Cover an old coffee or side table, and watch how your room is transformed!
- Prettify your bookshelves. Bookshelves can sometimes make for bulky living room furniture, but with a couple tweaks, they can actually add some fun to your space. Apply a layer of wallpaper or wrapping paper to the backs of each shelf, allowing the fun color to peek in through the books. With a fresh coat of paint on the outside, your old bookcase could be the new colorful and modern highlight of the room.
- Make a faux marble tabletop. Real marble will set you back quite a bit, but marbled contact paper can give you the same look while costing much less! Use this on smaller tabletops, like side tables. You could also cover it in a layer of glass or clear plastic if you wish to.
Let’s Get Soft
Age does the same thing to furniture as it does to everything else: it dulls edges, rounds corners, and generally makes things “softer”. With this in mind, there’s no better starting point than softening all the hard edges of your piece. Take a hammer and hit all of the corners and edges, including the legs. Next, take some sandpaper (a good rough grain is a good idea at this stage, I recommend 60) and go over all the edges. However, do not do this in a uniform manner. You want the furniture to look weathered, not systematically sanded down. A perfectly even wear is what you want to avoid, so try to go harder on the areas where more action is likely to have occurred, such as leaning one’s feet or arms on it.
Wham Bam That Furniture Looks Antique Ma’am
This is one of the more enjoyable steps to “vintage-izing” your furniture. Take the hammer that you’d used in Step 1, and drop it a few times from a height of about 15cm all over the piece. Provided you’re not using the Gravity Hammer from Halo, this should give the piece some nice nicks, gouges, and scrapes, and suggest that it’s of an advanced age. Also, don’t be afraid to flip the hammer around and use the claw to add some longer scrapes along the surface of the piece. How hard you drop and scrape depends on the type of wood you’re working with, as softer woods like pine will be more easily damaged than cherry or oak.
This is where most people go wrong when making new furniture look old. They’ve followed the first two steps, but then they apply some lovely fresh paint. This makes the furniture look poorly made as opposed to vintage. So, how can one avoid this? Choose two contrasting colours, then paint one over the other to make it look as if the original colour has been painted over. The colour choices are up to you, but just be sure to let the first coat dry before you apply the second, as you don’t want them blending together. When applying the second colour, don’t paint over every inch of the piece. Leave some of the first colour exposed, to give the impression of the paint having been worn down over the years/decades/centuries (how old are you telling people this furniture is, by the way?).
The Distress Test
You’ll need some sandpaper again, but not the coarse grain from Step 1. Go with a much finer grain (ideally around 220), and lightly go over the entire piece in order to take any lingering “new paint” shine away. Once you’ve aged the paint job, take the same fine sandpaper and sand down the edges, corners, and any spots that would see more wear (which was also explained in Step 1). You can even sand through to the first coat of paint in order to enhance the whole “this table has been here since the days of Pliny the Elder” feel.
The Ol’ Wipe-Down
Once you feel that you’ve truly achieved the vintage look, wipe down the entire piece with a dry cloth to rid it of any lingering dust from sanding. Paste wax is recommended if you want to coat it, but I say skip that altogether and leave it as is. You’ve just spend the last few hours giving the appearance of wear and tear, why not let things unfold as they may? Any wear and/or damage will just increase the appearance of age and hard use.
Not all fire damage is the same. The extent of destruction is unique to each and every accident. But there are common forms of harm that most burn events suffer. One main obstacle is the smoke and residue that is left behind. The items that are burned can leave behind deposits and other particles. Smoke also leaves a strong odor. Depending on what has been scorched, clean up can be simple or difficult. Objects such as paper produce very small elements that are easy to clean but will leave behind an scent if not cleansed the right way. The residue and particles can become trapped in the walls. Burns that come from food can leave a thicker, greasier residue that is harder to remove on one’s own as well. These are situations in which professional services are needed.
Everyone knows that water is used by firemen to extinguish unruly flames. Water is also used by individuals who attempt to put out the flames on their own. But once that inferno is put out, this water remains. And this water can cause extensive damage to the building as well. It’s as if the building has suffered both an inferno and a flood in one day. When this happens, professional fire damage services can extract this water as safely as possible. No matter how much water exists, no task is too big or too small. With top-notch drying tools, the building can be restored in no time. Depending on the extent of the damage, carpet can be easily dried. Taking the proper measures to remove water and dry the building can prevent mold formation.
It’s no secret that fire damage can affect all of the items within the affected building. This includes clothing. It is very important that each individual have clothes. Besides, no one can leave the house undressed. Instead of completely replacing the soot-filled clothing, individuals should use the qualified dry cleaning services offered by a flame repair company. This can save families tons of money that can be used in better ways. There are people who specialize in removing impurities from materials like carpet and furniture. Even more expensive items can be made as good as new. However, it is impossible to restore these items on one’s own. Professional services are necessary. Fire damage repair services are available at all hours on every single day. Accidents can happen at any time. The right steps can prevent further harm and restore the entire building.
The first tip is to consider what kind of style you would like for your TV stand, as this will narrow down your search significantly. After choosing the style, you can then move on to deciding which specific features you need and other factors, so choosing whether you would prefer traditional cabinets over contemporary TV stands – or vice versa – is essential at this point.
To do this accurately, consider the style of the room that you intend to put the stand or cabinet in. Is it full of traditional furniture or is it a modern, minimalist room? Would a sleek and glossy contemporary design look good or would a traditional carved wood TV cabinet fit in best with the surroundings?
After you have chosen your style – whether traditional or contemporary TV stands – your next move should be to narrow down a list of colours that you think would work in your room. Although this may seem like an obvious point to make, figuring out which colours will work in your room beforehand can save you a great deal of time during the shopping process.
Thirdly, consider which area of the room your TV will be placed in. This is important for figuring out which shape and design your TV stand or cabinet should be. In rooms without a great deal of floor space, you may want to consider looking for a wall-mounted stand, which can be suspended above existing furniture or decorative objects.
On the other hand, a corner TV stand is great for those rooms that need to maximise the use of space and cannot afford to give their TV a whole stretch of wall. For those that would like to place their TV in a central position and have plenty of space to spare, some companies offer living room furniture sets that will include a stylish stand or cabinet along with other coordinating furniture.
Fourthly, think about how much space you actually need in your stand or cabinet. Some of the most sleek and contemporary TV stands have minimal space, with just a few stylish glass shelves and a glossy back panel. Other options can provide ample space for holding DVDs, DVD players, Freeview boxes, decorative items and much, much more.
A fifth tip is to note down the specific weight and dimensions of your TV along with all other items that you will be keeping in your cabinet or stand. Some designs might be extremely stylish, but can lack the strength to safely support your devices. Knowing your specifications in advance will help you rule out unsuitable options a great deal more quickly.
Lastly, decide whether or not you prefer a design that will conceal cables and other unsightly electronics. Many more recent contemporary TV stands and cabinets will feature cable management systems which can reduce or eliminate the need for cabling to trail across the floor or walls. This can make for a tidier and safer home.
By following these few tips, it can be much easier and quicker to find a TV stand that fits your home. By bearing all of these factors in mind when you go shopping, you can rapidly eliminate options that are entirely unsuitable for your home and instead hone in on some truly fantastic stand and cabinet options that meet your needs.
When you visit a friend’s home, what you usually see hanging on their walls are pictures framed neatly and creatively that do not only match the overall home design but also have this distinctive style that reflects the owner’s good old memories. How are these pictures preserved so nicely?
By framing an old and ordinary photograph, a simple piece of paper can become a masterpiece wall decor. With just a little imagination, creativity, resourcefulness and patience, one can make an art piece with a single photo.
Though some people have their artistic side, most people especially homeowners prefer to have their treasured photographs framed by art professionals. This is also advantageous because you don’t have to do all the hard and tedious work. You just have to think of a concept or an idea of how you want the frame to look like. If you don’t have any idea in mind, you can browse some of your home improvement magazines. Check the latest trends and styles in framing. Conceptualize your ideas and think of something that will also complement the overall design of your home. Do not hesitate to share your ideas to the art professional who will frame your photographs. They are willing to listen and maybe suggest something that will even make your photos more amazing to look at.
By creatively framing your photos, you instantly add more value to it. Rather than just having it stored in a box or in an album, have it framed and hang it on the wall so that every time you miss those happy days, you will instantly be reminded through the framed pictures hanging on your wall. Make your happy moments even more memorable. Select pictures that remind you of something great and something you want to hold on forever such as photographs when you and your husband were still dating, pictures of your wedding, a picture of your baby’s first smile, a picture of the old house you used to live in or anything that has a great meaning in your life.
Majority of faux wood paneling does not come with that unique natural wood top layer. If you want your home to look more upbeat, be sure to tear it down, repair the wall, then apply a fresh coat of paint so that the room will appear bigger – and better. If you are trying to stage your home for sale in the market, then this is also an effective way to generate a much higher sales price.
About 99% of the time, fake wood paneling is not a good material to place inside a home. Just rip it out because it has a strong implication of the ’70s basement rec rooms. Of course, everyone already knows that such rooms are not only cheap but are also fake.
To have an inexpensive, quick fix, it is best to cover it with paint. A few homeowners painted over their fake wood paneling and they marveled at the unique texture that they were able to achieve. They also saved a lot because they just invested in paint – a project that is a lot cheaper than recreating the texture with real wood.
Quality primer disguises that seemingly plastic layer and you end up with a look that is similar to authentic wood paneling.
Depending on how the faux wood paneling was made, though, many have a wood-grain texture that can show right through the paint. This will show as a bead board of sorts and so it can appear quite nice.
Now, it is time to learn what materials you will need for this weekend project and how you would proceed in painting those walls –
- Any brand of liquid de-glosser
- Shellac or oil-based primer
- 3/8″ Nap paint roller
- Satin or latex eggshell finish paint
- Painter’s tape
- 2″ Nylon-Poly brush
Start by cleaning the faux wood paneling then taping off the windows, adjoining woodwork and ceilings. Be sure to turn off fans and to open windows to ensure good ventilation.
Apply the de-glosser. Using a cotton rag with zero lint, lightly apply the de-glosser to the paneling in five-foot strips. Let it sit according to the label instructions then –
Using a brush or roller dipped in an oil-based primer, cut in and prime to the paneling grooves. Be sure to roll out the remainder.
Finally, brush the satin or eggshell finish onto the dried primer. Cut in lengthwise into the grooves of the paneling. Roll out the remainder using the 3/8″ nap roller.
Allow the base coat to dry out for about 6-8 hours before applying the second coat. Remove all tapes as soon as you are finished.